Terrace insulation

ultraVIP Terrace Insulation

Data sheet

Structure

Description

  • ultraVIP has been specially developed for the insulation of terraces and flat roofs
  • The 50 mm PUR roll allows the edges to be flexibly adjusted (trimmed) to accommodate any construction tolerances of up to 30 mm directly on site, thus ensuring a perfectly tailored solution
  • Fully protected all round and extremely robust against damage
  • A sturdy adhesive tape around the edges of the panels protects and marks all edges not intended for trimming.
  • Within the area to be insulated, no PUR inserts are used at the edges of the VIP elements. This ensures that the high thermal insulation value of the vacuum panels across the entire surface is not reduced by PUR webs.
  • Particularly in terrace areas, the low installation height of 38–63 mm, combined with a U-value of 0.35–0.15 W/m²K for the vacuum panels, is a decisive advantage in avoiding the need for steps.
  • Passive house-compliant values are achieved from an installation height of 58 mm.
  • Additional PUR shims, matching the thickness of the panels ordered, allow for flexible adaptation to specific conditions (drainage, downpipes, uneven surfaces, wider dimensional tolerances, etc.).

Top layers

  • 3 mm rubber granulate mat on the underside and, on the upper side, a choice of a 10 or 15 mm PUR panel
  • Panels at the edges of the area to be insulated are fitted with 50 mm of PUR on the sides facing the outer edge
  • All-round, high-strength edge protection tape

Edge formation

  • Flat (straight edges, at right angles with no profiling)

Insulation core

  • vakuVIP B2 vacuum insulation panel
  • Components: Compressed mixture of silica, opacifying agent, cellulose fibres
  • Non-combustible; safe in terms of human health and building biology

Formats

Standard formats

  • 1000 x 600 mm
  • 1000 x 300 mm
  • 600 x 500 mm

Standard thicknesses

38 mm

48 mm

58 mm

63 mm

Personalised options

  • Special sizes and other thicknesses available on request
  • Bespoke production according to customer requirements or based on a laid-out installation plan

Features of the vakuVIP B2

Thermal conductivity

  • ≤ 0.0040 W/(m·K) Initial value before ageing for vakuVIP at an
    internal pressure of < 5 mbar (measured value during testing in accordance with DIN EN 12667)
  • 0.0070 W/(m·K) Design value, including ageing and edge effects, for
    vakuVIP

Compressive strength

  • ≥ 125 kPa in accordance with DIN EN 826

Density

  • Thickness > 20 mm: 180 to max. 210 kg/m³ in accordance with DIN EN 1602
  • Thickness ≤ 20 mm: 180 to max. 250 k/m³ in accordance with DIN EN 1602

Weight

  • approx. 4 kg/m² at a thickness of 20 mm, plus a rubber granulate laminate and a PUR board

Temperature range

  • -50 to +90°C / -58 to +194°F
  • briefly (approx. 30 mins) up to +130°C / 266°F

Service life

  • in dry conditions (relative humidity < 60 per cent) and
    temperatures of 5 °C – 30 °C, up to 50 years depending on the application

Building material class (DE)

  • DIN 4102-1 B2
  • The core of the vacuum element is non-combustible, Class A1

Environment

  • Recyclable core
  • No glass fibres, no toxic substances

Thickness comparison

U-valueW/(m²K) ultraVIPWLG 0.007*Thickness in mmMineral woolWLG 0.04*Thickness in mmPolystyreneWLG 0.035*Thickness in mmRigid PU foamWLG 0.03*Thickness in mm
0,2938139122104
0,2048196171147
0,1658253246190
0,1563282246211

U-value of the insulation core based on a λ-value of 0.007 W(m*K) and comparative values for other materials.

* Design value (calculated value) of thermal conductivity for vakuVIP B2 20 mm (for 10 mm, WLG 0.008 applies). The specifications for the U-value and thickness take into account the facing layers (on both sides).

Applications

Tailor-made advice

Do you have any questions or would you like a personalised consultation?

Please contact our sales team – we’ll be happy to provide you with expert advice tailored to your specific application and find the ideal solution for your project.